Serving the El Paso area  ·  (915) 615-5295  ·  Open Mon-Sun 7am-7pm
📞 (915) 615-5295 Free Quote

Metal Roofing in Clint, TX (79836) · Local Professionals

El Paso Metal Roofing · Fast response in Clint and the El Paso area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Clint, Texas, is a small town where pecan orchards meet the desert, and the housing stock tells the story: modest ranch homes, a few brick bungalows, and plenty of agricultural buildings and shops tied to the farming community. If you live off Alameda Avenue or near the Clint High School, you know how intense the sun gets and how fast a monsoon storm can roll in from the Franklin Mountains.

That is why homeowners and property managers in Clint (79836) call El Paso Metal Roofing. We have been working in the Lower Valley and surrounding areas since 2009, and we understand the specific challenges of roofing here: intense UV, spring dust storms, and summer hail. Our team is fully insured and a member of the Metal Roofing Alliance, so you can trust the work is done right.

Metal Roofing in Clint (79836)

Clint is a mix of residential and agricultural properties, and that means roofing here is not one-size-fits-all. Many homes sit on larger lots with pecan trees, which can drop limbs and create shade that affects how a roof dries after rain. The soil is often sandy or rocky, and drainage can be an issue if gutters are not sized correctly. We see a lot of low-pitched roofs on ranches and farm buildings, and those are perfect candidates for corrugated or ribbed panel roofing. For homes, standing seam and stone-coated steel are popular because they reflect heat and hold up to hail. Access can be tight on some properties, especially where orchards or fences limit where we can stage materials, so we plan each job carefully.

Our team has been serving Clint and the El Paso area since 2009, and we have seen just about every roofing situation this region can throw at us.

Our services in Clint

How a Job Works in Clint

Step 1: You call us at (915) 615-5295 or fill out our contact form. We schedule a free on-site assessment at your Clint property, where we inspect the roof, check for leaks, and discuss your options. We will give you a written estimate before any work begins.

Step 2: Once you approve the estimate, we pull the necessary permits. In Clint, roofing permits are typically required for replacements, and the rules are enforced by the county. You can check with the City of Clint website for general information, but we always confirm requirements with the local building department. Our crew then gets to work, and we protect your landscaping and keep the site tidy. For agricultural buildings, we often work around your schedule to minimize disruption.

Step 3: After the job is done, we do a thorough cleanup, including magnet sweeping for nails. We walk the roof with you to make sure you are satisfied and answer any questions. We do not consider the job finished until you are happy.

Pricing for metal roofing in Clint depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are retrofitting over shingles, that starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a typical Clint ranch home, a full replacement might range from $10,000 to $20,000, but every roof is different. We offer free estimates, so call us at (915) 615-5295 to get a precise quote for your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Clint and nearby areas.

Do you work on agricultural buildings and barns in Clint?
Yes, we do. Clint has many pecan orchards and farm buildings, and we specialize in corrugated and ribbed panel roofing for agricultural structures. We understand the need for durable, low-maintenance roofs that can handle dust and sun. Our team is experienced with the unique challenges of these buildings, from wide spans to tight access.
How quickly can you respond to storm damage in Clint?
We offer free inspections for storm and wind damage, and we prioritize emergency repairs. After a monsoon storm, call us at (915) 615-5295, and we will schedule an inspection as soon as possible. We can often provide temporary fixes to prevent further damage while you wait for a permanent repair.
What is the typical cost for a metal roof repair in Clint?
Most repairs start at $450, but the final cost depends on the extent of the damage and the type of roof. For example, a leak repair might be straightforward, while replacing damaged panels or flashing could cost more. We give you a written estimate before any work, so you know what to expect.
Do I need a permit for a metal roof in Clint?
Yes, roofing permits are commonly required for replacements and sometimes for repairs, depending on the scope. The rules are set by the county, and we handle the permitting process for you. We recommend checking with the local building department to understand the specific requirements for your property.
What if my HOA has rules about roof color or style?
Many HOAs in the El Paso area have design guidelines, especially for color and panel profile. We can provide samples and documentation to help you get approval. If you are in a historic district, there may be additional restrictions. We will work with you to find a solution that meets both your needs and the rules.
Are you insured for work on my Clint property?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of any accidents during the job. We can provide a certificate of insurance upon request.
How often should I have my metal roof inspected in Clint?
We recommend an inspection every two to three years, especially after major storms. The intense sun and dust in Clint can cause fasteners to loosen over time, and catching small issues early can prevent leaks. We offer free estimates for inspections, so call us to schedule one.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in El Paso

All your work handled by qualified professionals in El Paso

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in El Paso

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in El Paso · Response within 24h · No commitment · ☎ (915) 615-5295

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in El Paso ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm