Serving the El Paso area  ·  (915) 615-5295  ·  Open Mon-Sun 7am-7pm
📞 (915) 615-5295 Free Quote

Metal Roofing in Fabens, TX (79838) · Local Professionals

El Paso Metal Roofing · Fast response in Fabens and the El Paso area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Fabens is a farm town where the roofs take a beating. The sun fades paint on corrugated barns and ranch houses along the Rio Grande, and the spring dust storms and summer monsoons work the fasteners loose on older panel roofs. If you live off Fabens Road or near the O'Donnell Street shops, you've probably seen a few roofs that need attention.

We're El Paso Metal Roofing, and we've been working on Fabens roofs since 2009. From the pecan orchards in the Lower Valley to the stucco homes near Fabens High School, we know how metal holds up out here and what it takes to make it last. Call us at (915) 615-5295 for a free look at your roof.

Metal Roofing in Fabens (79838)

Fabens sits low in the desert along the Rio Grande, and that means flat lots, tight spacing between homes, and a lot of older agricultural buildings mixed in with single-story ranch houses. The ground here is mostly caliche and sand, so drainage after a monsoon can pool quickly if gutters and canales aren't sized right. Many properties have mature pecan trees that drop limbs and fill valleys with debris, which is hard on panel seams and fasteners. We see a lot of sun-faded corrugated roofs on barns and shops that just need coating or re-fastening, and we see standing seam and stone-coated steel going up on newer homes that want to reflect the heat instead of soak it in. Access can be tight on the smaller farm lots, so we plan staging carefully and keep equipment off your landscaping.

Our team has been serving Fabens and the surrounding El Paso County area since 2009, and we're a Metal Roofing Alliance member. We're fully insured with general liability and workers' compensation, so you're covered while we're on your property.

Our services in Fabens

How a Job Works in Fabens

Step 1: You call us at (915) 615-5295 or send a message, and we set up a free on-site assessment. We'll walk the roof, check fasteners, seams, flashing, and any signs of leaks or storm damage, and we'll talk through whether a repair, coating, or full replacement makes sense for your budget and the age of your roof.

Step 2: Once you approve the estimate, we schedule the work. In Fabens, that often means coordinating around farm equipment or tight driveway access, and if your property is in an HOA or near a historic area, we'll help you get the panel profile and color approved before we order materials. We also pull the required roofing permit through the local building department, and you can check general county information at the City of Fabens website if you want to understand the process.

Step 3: When the job is done, we clean up thoroughly, haul away old materials and debris, and do a final walkthrough with you. We make sure you know what was done, how to maintain it, and who to call if anything comes up. We leave your property clean and your roof ready for the next monsoon.

Pricing in Fabens depends on the size and pitch of your roof, how easy it is to access, the condition of the existing decking, and how soon you need the work done. For a typical ranch home, metal roof installation starts around $8 per square foot, standing seam runs about $10 per square foot, and a full replacement starts around $9 per square foot. If you're going over existing shingles with a retrofit, that starts around $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening starts at $750, and metal roof coating and painting starts at $2.50 per square foot, which is a popular option for older barns and shops in the Lower Valley. We give free estimates, so call (915) 615-5295 and we'll give you a straight answer for your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Fabens and nearby areas.

My barn roof off Fabens Road is faded and some screws are backing out. Can you fix that without a full replacement?
Yes, that's a common job for us in Fabens. We can replace the failed screws, re-fasten the panels, and apply a metal roof coating to protect the panels from the sun. That usually costs far less than a new roof and buys you years of service, as long as the panels themselves are still sound.
A monsoon storm just peeled back part of my roof near Fabens High School. How fast can you get out?
We treat storm damage as a priority. Call us at (915) 615-5295, and we'll schedule a free inspection as soon as possible. We can tarp or secure the area to prevent further water damage, then give you a written estimate for the repair and help document the damage for your insurance claim if you're filing one.
What does a typical metal roof repair cost in Fabens?
Most repairs start at $450, and the final price depends on the type of repair, how many fasteners or panels are involved, and whether there's decking damage underneath. Leak repairs and flashing repairs fall in that same range. We'll give you a clear estimate before any work begins.
Do I need a permit for a metal roof replacement in Fabens?
Roofing permits are commonly required for a full replacement or re-roof, and the rules vary by jurisdiction. We handle the permitting process for you and make sure the work meets local code, including limits on how many layers of existing shingles you can recover over. You can also check with the county through the City of Fabens website for general information.
My neighbor and I disagree about where the property line is, and my new roof panels might overhang. What should I do?
Before we install anything, we recommend having a survey done if the line is unclear. We can adjust the panel layout to stay within your property, and if you're in an HOA, we'll help you get the design approved first. It's better to sort that out before materials are ordered.
Are you insured for work on my property in Fabens?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you and your property while our crew is on site, and we're happy to provide proof of insurance before we start.
What should I do to maintain my metal roof between monsoons in Fabens?
Keep debris off the roof, especially if you have pecan trees nearby, and check gutters and canales before monsoon season. Have us inspect fasteners and seams every couple of years, since the sun and dust storms can loosen them over time. A coating every several years on older panels also helps them last longer.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in El Paso

All your work handled by qualified professionals in El Paso

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in El Paso

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in El Paso · Response within 24h · No commitment · ☎ (915) 615-5295

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in El Paso ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm