Serving the El Paso area  ·  (915) 615-5295  ·  Open Mon-Sun 7am-7pm
📞 (915) 615-5295 Free Quote

Metal Roofing in El Paso, TX (79901) · Local Professionals

El Paso Metal Roofing · Fast response in El Paso and the El Paso area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

El Paso roofs take a beating. From the sun-baked stucco ranches of the Northeast to the clay-tile Spanish Colonial Revivals in Kern Place and Sunset Heights, your roof faces intense UV, spring dust storms, and summer monsoon hail that pummels shingles and loosens fasteners. Out in the Lower Valley, pecan orchards and wide lots mean big roof spans, while Far East subdivisions in Horizon City and Socorro are seeing more standing seam and stone-coated steel go up to reflect the desert heat.

We are El Paso Metal Roofing, and since 2009 we have been installing, repairing, and replacing metal roofs across El Paso County. Whether you are near the Franklin Mountains or down by the Rio Grande in 79901, we know how local conditions wear out a roof. Call us at (915) 615-5295 for a free estimate.

Metal Roofing in El Paso (79901)

El Paso sits at about 3,800 feet in the Chihuahuan Desert, and that means year-round sun, low humidity, and soil that shifts with the seasons. Many homes here are single-story stucco ranches or flat-roofed Pueblo Revival and Territorial styles with parapets and canales, and those flat roofs need careful flashing and drainage detailing to handle monsoon downpours. Older brick bungalows from the 1910s to 1930s often have low-pitched roofs that are prime candidates for a metal retrofit over existing shingles, but you have to check how many layers are already there because local code limits re-covering. In historic districts like Manhattan Heights, design review can restrict panel profiles and colors, so we help you choose a metal system that passes muster. The intense sun and hail also mean fasteners back out and seams separate over time, which is why we use high-quality screws and closures rated for this climate.

Our team has been serving El Paso and the surrounding areas since 2009, and we are a Metal Roofing Alliance member. We are fully insured with general liability and workers' compensation, so you are covered from the first day.

Our services in El Paso

How a Job Works in El Paso

Step 1: You call us at (915) 615-5295 or request a free estimate online. We schedule an on-site assessment at your convenience, inspect your current roof, discuss your options, and provide a written estimate. We will also flag any permit requirements with the City of El Paso early so there are no surprises.

Step 2: Once you approve, we order materials and schedule the work. Our crews are experienced with tight lot access in older neighborhoods, HOA coordination in newer subdivisions, and the steep grades and rocky ground common in the foothills. We pull the necessary permits and keep you informed on timing, especially during monsoon season when weather can affect the schedule.

Step 3: After installation, we do a thorough cleanup, haul away all debris, and walk the property with you to make sure you are satisfied. We do not consider the job done until you are happy with the result.

Pricing for metal roofing in El Paso depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind local code limits the number of layers you can cover. Repairs start at $450, and screw replacement or re-fastening starts at $750. We also offer coating and painting from $2.50 per square foot, and gutters from $9 per linear foot. For a free estimate tailored to your property, call (915) 615-5295.

✅ Metal Roofing Alliance Member, licensed and insured for work in El Paso and nearby areas.

My flat-roofed Pueblo Revival home in Sunset Heights has canales, and water pools near the parapet. Can a metal roof help?
Yes, a properly detailed metal roof with standing seam panels and custom flashing can improve drainage and prevent pooling. We often install tapered insulation or crickets to direct water toward the canales or scuppers, and we seal all penetrations. Given the historic nature of many Sunset Heights homes, we also check design review requirements before recommending a profile and color.
A monsoon storm just lifted some panels on my roof in the Lower Valley. How fast can you respond?
We prioritize storm damage calls, especially when panels are loose or missing and rain is expected. Call us at (915) 615-5295 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp or secure the area temporarily and provide a written estimate for permanent repairs, and we document everything for your insurance claim if you file one.
What does a typical metal roof replacement cost for a 2,000-square-foot ranch house in the Northeast?
For a 2,000-square-foot home with a simple gable roof, a metal roof replacement typically ranges from $18,000 to $24,000 depending on the panel type, tear-off, and any needed deck repairs. Standing seam runs higher, while corrugated or ribbed panels are more economical. Access, roof pitch, and the number of penetrations also affect the price. We provide a free on-site estimate so you get an accurate figure.
Do I need a permit to replace my roof in El Paso, and how do I check?
Yes, roofing permits are commonly required for a full replacement or re-roof in El Paso, and requirements vary by jurisdiction. We recommend checking with the City of El Paso's building department before starting any work. We can help you navigate the permit process and ensure the job meets local code, including limits on how many layers of shingles can be covered.
My HOA in the Far East requires a specific roof color, and my neighbor says the new panel profile blocks their view. What can I do?
HOA design review often dictates panel profile and color, so we start by getting the HOA's approval before ordering materials. As for property lines, roof overhang and drainage must stay within your property boundaries and not encroach on a neighbor's airspace. We can review your plat and HOA guidelines to ensure compliance and avoid disputes.
Are you fully insured for roofing work at my El Paso property?
Yes, we are fully insured with general liability and workers' compensation coverage. We are happy to provide a certificate of insurance upon request so you can verify our coverage before work begins.
What maintenance does a metal roof need in El Paso's dusty, sunny climate?
In El Paso, dust and grit accumulate on metal roofs, especially after spring dust storms. We recommend an annual inspection to check fasteners, seals, and flashing, and to clear debris from gutters and canales. Coating or painting every 10 to 15 years can extend the life of the finish. We offer inspection and maintenance plans to keep your roof in top shape.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in El Paso

All your work handled by qualified professionals in El Paso

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in El Paso

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in El Paso · Response within 24h · No commitment · ☎ (915) 615-5295

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in El Paso ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm