Serving the El Paso area  ·  (915) 615-5295  ·  Open Mon-Sun 7am-7pm
📞 (915) 615-5295 Free Quote

Metal Roofing in Sparks, TX (79927) · Local Professionals

El Paso Metal Roofing · Fast response in Sparks and the El Paso area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Sparks is a quiet stretch of the Rio Grande valley where stucco ranch homes and flat-roofed Pueblo Revival houses sit close to the river, just minutes from the Socorro Mission and the pecan orchards that line the Lower Valley. If you live here, you already know the sun and dust do a number on older metal roofs, especially around the parapets and canales where water loves to pool.

Homeowners in Sparks (79927) call El Paso Metal Roofing because we understand the local building stock: 1950s and 60s ranch houses with low-slope roofs, newer stucco subdivisions with standing seam, and everything in between. We have been serving the El Paso area since 2009, and we know the back roads, the tight lots, and the specific ways metal roofs fail in this desert climate.

Metal Roofing in Sparks (79927)

Sparks sits at about 3,800 feet along the Rio Grande, and the housing here reflects decades of local building styles. You will find single-story stucco ranches with low-pitched shingle roofs, flat-roofed Pueblo Revival and Territorial-style homes with parapets and canales, and a growing number of standing seam and stone-coated steel roofs chosen to reflect the intense desert sun. The soil is sandy and rocky, and drainage often relies on grading away from the foundation rather than gutters, which means roof leaks can go unnoticed until they show up as stains on the ceiling. The intense year-round sun, spring dust storms, and summer monsoon thunderstorms with hail take a toll on fasteners, seals, and flashing. We have seen countless roofs in Sparks where backed-out screws and separated seams are the first sign of trouble, especially on homes near the Socorro area.

Our team has been working on metal roofs in Sparks and across El Paso County since 2009. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we know the local building department requirements. Whether your roof is a flat Pueblo Revival style or a newer standing seam installation, we have the experience to handle it.

Our services in Sparks

How a Job Works in Sparks

Step 1: We start with a free on-site assessment. You call us at (915) 615-5295, and we schedule a time to inspect your roof, check for leaks, loose fasteners, and flashing issues, and discuss your options. We will give you a written estimate before any work begins.

Step 2: Once you approve the estimate, we schedule the work. In Sparks, many homes have tight lot access or are in HOA communities, so we plan accordingly. We also handle permit coordination with the local building department, and if your home is in a historic district or has HOA design rules, we help you navigate those requirements. Our crews are trained to work efficiently and safely, whether it is a simple repair or a full replacement.

Step 3: After the work is done, we clean up thoroughly and walk the property with you to make sure you are satisfied. We haul away all debris and leave your yard and driveway as clean as we found them. We do not consider a job finished until you are happy with the result.

Pricing for metal roofing in Sparks depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot, but keep in mind that local code limits how many layers you can have. Repairs like leak fixes start at $450, and screw replacement and re-fastening starts at $750. For a precise quote tailored to your home, call us at (915) 615-5295 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Sparks and nearby areas.

My house near Socorro has a flat roof with parapets, and I keep getting leaks where the roof meets the stucco wall. What is causing that?
That is a very common issue in Sparks. Flat roofs with parapets often develop leaks at the flashing where the roof meets the wall because the original sealant dries out and cracks under the desert sun. We can inspect that junction, replace the flashing, and apply a proper seal to stop the leak. We also check the canales and scuppers to make sure water drains away from the wall.
A storm just blew through and lifted some panels on my metal roof. Can you come out quickly?
Yes, we offer storm and wind damage repair with free inspections. Call us at (915) 615-5295, and we will schedule a prompt visit to secure the roof and prevent further damage. We can tarp or make temporary repairs if needed, then provide a permanent fix.
How much does a typical metal roof repair cost in Sparks?
Most repairs, like fixing a leak or replacing a few fasteners, start around $450. More extensive work, like re-fastening an entire roof, starts at $750. The final cost depends on the size of the roof, ease of access, and the extent of the damage. We give you a firm quote after inspecting the roof.
Do I need a permit to replace my roof in Sparks?
Permits are commonly required for a full replacement or re-roof, and the requirements can vary. We recommend checking with the local building department to confirm what applies to your property. You can find contact information on the City of Sparks website. We can also help you navigate the permit process as part of our service.
My HOA has rules about roof colors. Can you help with that?
Yes, we work with many homeowners in HOAs. We can provide samples and documentation to help you get approval for the color and profile you want. If your home is in a historic district, there may be additional design review, and we can guide you through that too.
Are you insured for work on my property?
Absolutely. We are fully insured, carrying both general liability and workers' compensation insurance. We are happy to provide certificates of insurance upon request.
What should I do to maintain my metal roof in Sparks between storms?
Given the dust and sun, we recommend an annual inspection to check for loose fasteners, worn seals, and debris in valleys and gutters. After a dust storm or hailstorm, look for dents or lifted panels. Keeping the roof clean and addressing small issues early can prevent costly leaks. We offer free inspections to help you stay ahead of problems.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in El Paso

All your work handled by qualified professionals in El Paso

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in El Paso

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in El Paso · Response within 24h · No commitment · ☎ (915) 615-5295

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in El Paso ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm